Tags:
create new tag
, view all tags
Error: can't fetch image from 'https://ecse.monash.edu/twiki/pub/WSRNLab/CompilingAndRunningTheTimerTickSenderSoftware/setup.jpg': 501 Protocol scheme 'https' is not supported (IO::Socket::SSL not installed)

Timer tick demonstration

Each node sends a packet to the border router every 10 seconds. When the border router receives a packet, it displays the sender IP and time the packet was sent.

Timer tick node software

  1. cd to contiki-2.6/examples/wmeshboard/timer-tick-sender/timer-tick-node
  2. Compile it:
    make TARGET=sky time-tick-node nodeid=X
    (where X is any integer except for 0 and 1)
  3. Program it to the board:
    sudo mspdebug -d /dev/ttyUSB0 -j uif "prog ./timer-tick-node.sky"

Border router software

  1. cd to contiki-2.6/examples/wmeshboard/timer-tick-sender/border-router
  2. Compile border-router.c with nodeid=1
  3. Program it onto the board:
    sudo mspdebug -d /dev/ttyUSB0 -j uif "prog ./border-router.sky"
  4. View the serial output of the board – see step 4 under “Compiling and Running the Tag Software” in "Compiling and Running the RSSI Localisation Software"
Topic revision: r4 - 2013-01-14 - ZoiPetroulias
 
This site is powered by the TWiki collaboration platformCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback